Get In
Touch

Vehicle Sealants, Waxes & Finishings

Sealants |  Ceramics | SiO2

After correcting or deep cleaning the surface of a vehicle, it is important to protect and preserve the hard work that has been carried out.

Our sealants, waxes and finishing products offer various protective properties, which have various lengths of durability, gloss and ease of use. We have the perfect range of sealants, waxes and finishing products, no matter the end result you’re searching for.

Sealants

Hard Coat

This is the perfect intermediate level coating which can be used with ease and offer professional levels of protection and hydrophobicity. Simply spray on and wipe off for over 12 months of protection from advanced hybrid technologies. Solvent and water based options available. Please note, this is non-stock item and therefore minimum order quantities may apply.

Quick Coat

An easy to use, concentrated-spray-sealant, simply spray onto the surface and immediately pressure wash off. It is safe on all exterior surfaces (standard finish only – matte paintwork & wraps are not recommended for this product). 

Quick Coat will deliver an extremely hydrophobic effect, providing sheeting, gloss and protection for up to 4 months. Quick Coat is a stocked A-Chem product available for distributors.  

Rinse Coat

An easy to use, ready to use spray-sealant, simply spray onto the surface and immediately pressure wash off. It is safe on all exterior surfaces (standard finish only – matte paintwork & wraps are not recommended for this product). 

Rinse Coat will deliver an extremely hydrophobic effect, providing sheeting, gloss and protection for up to 2-3 months. Rinse Coat is a stocked A-Chem product available for distributors.  

Glass Sealant

A sponge applied, cure then buff sealant that provides months of durability to give you perfect beading on your exterior windows and screens, as well as being able to be used as a rain repellent at low driving speeds. The ultimate glass sealant.

Fabric Coat

High active stain and liquid repelling sealant that gives extreme durability. Simply spray onto the fabric, and leave to dry to an invisible film. This product is only available under bespoke manufacturing and is not part of A-Chem’s standard range at present. Extended lead times, and minimum order quantities may apply. 

Leather Coat

An advanced leather coating that protects leather against staining and water damage, whilst allowing it to breathe. This product is only available under bespoke manufacturing and is not part of A-Chem’s standard range at present. Extended lead times, and minimum order quantities may apply. 

Wheel Coat

Wheel Coat is the perfect sealant to protect your wheels against re-soiling and is resistant to high temperatures – a simply spray, buff and seal product. This product is only available under bespoke manufacturing and is not part of A-Chem’s standard range at present. Extended lead times, and minimum order quantities may apply. 

 
 

Ceramic Sealants

A-Chem offers the latest technology in ceramic coatings for the car care market under our bespoke manufacturing service. As with all of the products that are developed and manufactured on site, we can formulate a coating specifically tailored to your requirements.

Our ultra-durable ceramic coatings can provide over 24 months durability, with the hardness of 9H, while offering corrosion, wear and abrasion (swirls) resistant finishes. This can be modified to provide either beading (high contact angle) or sheeting (self-cleaning) effects.

Our coatings vary in application characteristics (or something similar to this) from easy and forgiving which is recommended for use by enthusiasts with guidance to high end, ultra-high Sio2 content coatings with hybrid chemistries. These are required to be professionally applied in controlled environments. 

Our custom ceramic coatings offer unrivalled flexibility and options for your brand and can be supplied packed in bottle sizes of your choice, or in bulk quantities as required. and will be able to resolve your bespoke needs. 

Waxes

Spray Wax

Spray Wax is the ultimate easy to use Carnauba infused spray wax. Spray Wax contains gloss enhancers as well as high-grade Carnauba wax to offer a high gloss and hydrophobic finish. Simply spray and buff to give wax protection. 

Hard Waxes

We offer a range of Hard Waxes which have been developed specifically for various applications;

  • High Carnauba Content Waxes – for gloss and depth of colour
  • Show Waxes – for high gloss and easy application/ removal
  • Hybrid Waxes/Sio2 Waxes – for extreme durability and hydrophobicity
  • Wheel Waxes – for high temperature applications and easy use

These are available in various pack sizes (sample size pots up to large tubs). Hard Waxes are currently only available under bespoke manufacturing (minimum order quantity – 50 tubs) and are not part of A-Chem’s standard range at present.

 
 

Finishing & Nano Technology

We have various products which contain advanced surface technologies to give high levels of performances and protection, these are explained below; 

Wax Rinse Supreme

Polymer wax additive which gives instant hydrophilic effects on the surface it comes into contact with, simply dilute up to 40-1 and spray on a surface, then rinse for immediate results.

Ultra Gleam Hybrid Car Polish

Uses reactive surface technology to provide extreme performance and durability in conjunction with Carnauba Wax to provide gloss and depth of colour. Simply apply to the paintwork, leave to cure and then remove for a detergent-resistant finish.

Finito

The ultimate high gloss and wet look quick detailer using nano technology. Simply spray and buff to give the perfect finish to a detail. Finito is perfect for a quick and easy top up of current bodywork protection. 

Ceramic Detailer

A surface reactive quick detailer which is easy to use. Simply spray and buff to give an instant gloss and high contact angle protection for up to 3 months. Ceramic Detailer is perfect for a quick and easy top up of current bodywork protection. 

Trim Coat

Hybrid trim and tyre dressing which uses advanced silicones, along with traditional trim dressing technology to give a durable water repellent finish and depth of colour to exterior plastics, tyres and trims. This product is currently only available under bespoke manufacturing, therefore minimum order quantities and extended lead times may apply. 

Self-Drying Shampoo

Simply add to your wash bucket, dilute and wash as you would with normal shampoo. When the foam has been rinsed from the surface, water simply sheets off of the vehicle bodywork. Without adding further production, the surface will then repel further dirt and water to give beading for multiple washes after just one use. This product is currently only available under bespoke manufacturing and is not part of A-Chem’s standard range at present, therefore minimum order quantities and extended lead times may apply. 

Trim & Tyre Dressings

We manufacture a range of products to keep on top of the tyres, trims of your vehicle, from water-based to solvent-based, and economical to premium – we have the perfect range. 

Solvent Based Tyre Dressings

Hi-Shine

A superior and versatile tyre dressing, formulated to restore a smooth original appearance to tyre and exterior trims. It will leave a water-repellent and long-lasting shine (2-3 weeks depending on the weather and previous tyre condition).

Tyre Gel

A high performance solvent based tyre gel that provides a highly durable finish to tyre. It provides a high gloss finish and spreads evenly without sling. Please note, this is non-stock item and therefore minimum order quantities may apply.

Water Based Tyre Dressings

Tyre Dressing Supreme

An economical water based tyre dressing. It is formulated to restore a smooth original appearance to tyre and exterior trim. Durability of the Tyre Dressing Supreme is up to 1 week in dry conditions.

Wet Look Tyre Dressing 

A high gloss tyre dressing which leaves a smooth wet look effect to tyres and trims. Durability of the Wet Look Tyre Dressing is up to 1 week in dry conditions. 

Trim Dressings

Trim Gel

An advanced hybrid dressing which offers the cost effectiveness of a water based product, but with the protection levels of a solvent trim gel. This product can be layered for high gloss, or buffed for a sheen finish – it can also be used on tyres and rubbers. Please note, this is non-stock item and therefore minimum order quantities may apply.

Revive Bumper and Plastic Gel

A mobile formulation which is quick and easy to use, simply wipe on and leave for high gloss, or buff for a satin effect. It leaves a waterproof finish and revives dull plastic surfaces to give a deep shine. This product contains no silicones. 

Supershine

A unique blend of solvents, waxes, oils and silicones for interior and exterior restoration of dashboards, bumpers, rubber, vinyl and plastics. It is versatile and durable, but is very easy to use with a fast evaporation rate. It restores trims and surfaces to new and has a pleasant cherry fragrance for interior use. 

Quickshine

A water based trim dressing, that is predominantly used to interior dashboards. However, Quickshine can be used to provide a silky finish on exterior plastics if durability is not key, or if the vehicle is kept indoors for the majority of the time, e.g. showroom vehicles. 

 
 

Tyre Paint

Black Tyre Paint

A product that provides near end of life tyres with a high gloss finish. It can be sprayed on tyres to give the “as new” appearance. Please note – this is not a tyre dressing and is not recommended for use when the tyre is on the wheel. This is non-stock item and therefore minimum order quantities may apply.

Bespoke Sealants, Waxes and Finishings Manufacturing

A-Chem offers a range of the below on a contract/ bespoke basis for your specific requirements. We’re able to blend chemicals to meet specific requirements, including;

  • Product colours
  • Viscosity
  • Gloss levels
  • Price point
  • Fragrance
  • Length of durability
  • Cleaning ability
  • Dilution ratios 

Minimum order quantities for bespoke products start at 400 Litres and up to batch sizes of 20,000 Litres. These products can be filled into various pack sizes, from 5 Litres up to 1,000 Litres. 

Be sure to contact our friendly team who will be able to assist you further.

 


A-Chem Limited
Dunsford Road, Alfreton
Derbyshire DE55 7RH